Mold after water damage
Mold Remediation in Pembroke Pines, FL
South Florida humidity gives mold everything it needs except a wet surface. A leak supplies that. Call and you are connected with an independent company that handles mold removal and the moisture behind it.
- Free to use, no obligation
- Independent local contractors
- Homes, condos, rentals and businesses
Mold is a moisture problem first
Mold spores are in the air everywhere, indoors and out. They grow where something stays wet: drywall that never dried after a roof leak, the wall behind an air-handler closet, carpet pad under a slow refrigerator line, a bathroom whose exhaust fan never ran. Scrubbing the spots you can see without fixing the moisture means they come back.
Proper remediation finds and stops the moisture, seals off the area so spores don't travel through the house and the ductwork, removes moldy porous materials, cleans what can be cleaned, dries everything and then checks the result. Florida licenses mold assessors and mold remediators separately, and for a large job it is worth using an assessor who isn't doing the removal.
Right now
What to do first
- Don't scrub, bleach or spray large areas yourself. Disturbing mold spreads spores.
- Find and stop the water if you can: a drip under a sink, a toilet seal, a roof or AC leak.
- Keep the door to the affected room closed and, if you can, close the AC supply vent in that room so spores don't circulate.
- Small spots on hard surfaces (under about 10 square feet, per EPA guidance) can often be cleaned yourself with gloves and a mask.
- Anyone with asthma, allergies or a weak immune system should stay out of the area.
What mold remediation involves
What a restoration contractor should do, so you know what to expect and what to ask.
Finding the moisture
Moisture readings and sometimes thermal imaging show where water is feeding the growth, including inside walls and above ceilings.
Containment
Plastic sheeting and a zip door seal the work area; negative air pressure keeps spores from drifting into the rest of the house.
HEPA air filtration
Air scrubbers filter spores out of the air during and after the work. Ductwork is checked if the AC served the room.
Removing porous materials
Moldy drywall, insulation, carpet pad and baseboards are cut out and bagged rather than cleaned.
Cleaning and drying
Framing, block and hard surfaces are HEPA-vacuumed and cleaned, then dried before anything is closed up.
Checking the result
A visual check, and sometimes air or surface testing by a separate licensed assessor, confirms the job is done.
How it works
From your call to a dry home
We don't run our own crews. When you call or send the form, we connect you with an independent local restoration company that serves your area. They inspect, give you the estimate and do the work.
- 1
Call or request a call back
We connect you with an independent company that handles mold in your area.
- 2
Inspection
The contractor finds the moisture source and how far the growth goes, and explains the scope.
- 3
Contain, remove, clean
The area is sealed, moldy materials come out, and surfaces are cleaned and dried.
- 4
Verify and rebuild
The area is checked before walls and floors are put back.
Costs
What mold remediation typically costs
| Job | Typical range | What moves the price |
|---|---|---|
| Small area, one wall or a vanity | $500 – $2,000 | Containment, drywall removed |
| One room, e.g. a bathroom or AC closet | $2,000 – $6,000 | Extent behind walls, ductwork involvement |
| Several rooms or an attic | $6,000 – $15,000+ | Access, size, testing |
These are planning ranges for typical jobs, not quotes or surveyed local averages. The contractor prices your job after an inspection. Plumbing, roofing, AC repairs and rebuilding are usually extra.
Questions
Mold Remediation: common questions
Do I need a mold test?
Not always. If you can see or smell mold, the priority is finding the moisture and removing the growth. Testing helps when the source is hidden, for a real-estate sale, or to confirm a large job was done properly. Florida licenses mold assessors separately from remediators, so you can hire one who isn't doing the removal.
Is black mold dangerous?
Any mold can cause allergy and breathing problems, especially for sensitive people. Color doesn't tell you the species or the risk. Treat it all the same way: fix the moisture and remove it properly.
Does insurance cover mold?
Usually only when it follows a covered, sudden water loss, and often with a cap. Mold from humidity, a long-term leak or a neglected AC is commonly excluded. Check your policy.
Why does my house smell musty when the AC starts?
Often because the air handler, its closet or the ducts have growth from a condensate leak or from a system that runs oversized and never dries the air. Have the AC closet and drain line looked at first.
Related
Other water damage help
Structural Drying
Air movers and dehumidifiers, readings every day, and a dry standard before anything is rebuilt.
Learn moreAC Leak Water Damage
The air handler runs all year here, and so does its drain line. When it clogs, the closet floor and the wall behind it pay for it.
Learn moreRoof Leak Water Damage
A brown ring on the ceiling after a storm means water in the attic insulation above it. What to do and who to call.
Learn moreAlso serving nearby cities
Besides Pembroke Pines itself, calls are taken from these neighboring Broward County cities.
Water damage right now?
Talk to a restoration contractor today
Call and you are connected to an independent restoration contractor who serves Pembroke Pines, Hollywood, Cooper City and Davie. Or leave your number and they call you back.